On Sat, Jan 27, 2007 at 02:25:25PM +0100, Reinhard Nissl wrote:
Hi,
Hello again,
Well, concerning the cables, my setup just misses the right 4 ones for the 28.2E LNB.
OK, I missunderstood, sorry.
Do you really have QUAD LNBs? I have QUATTRO LNBs.
Yes I do.
The difference is, that a QUATTRO LNB supplies the 4 bands (Horizontal Low, Vertical Low, Horizontal High and Vertical High) on specific ports on its own, while a QUAD LNB needs voltage and tone signalling on each port to decide which band it supplies to that port.
Would you mind providing some links to documentation about your LNB and switch models?
Sure : http://www.radio-materiel.ch/scripts/rama/fiche.html?ref=VNE-G3%2FG4 which point then to : http://www.radio-materiel.ch/new_design/radiomateriel/download/liens/vneg3g4...
( http://www.radio-materiel.ch/scripts/rama/fiche.w?ref=BISAT-G3 )
http://www.radio-materiel.ch/scripts/rama/fiche.html?ref=IDLP-401QDL
Maybe it has to do with the QUAD - QUATTRO issue, but let me first have a look into your documentation.
Well, it's pretty small docs... basically my quad lnb are exactly the same as four lnb would be.
Hhm, these settings only help in determining high/low band and the frequency to tune to. I first need to take a look into the code how kaffeine and xine-lib pass the information about the port to use to the DVB driver.
Thank you very much !